SCRIM WERKS™ 5 ft. LONG, 12" X 12" SQUARE TRUSS SLIP SCREEN™
Presentation is everything to your audience, so when you want to add that extra nice décor to your set up, use Odssey’s new Scrim Werks™ Slip screens. The TS1205 Slip Screen™ truss wrap covers any 12” square, 5 ft. long truss. Slip it over a dull or scratched up truss and transform it into a clean white column or illuminate it in glowing majestic colors with an LED light wash**. Use in conjunction with other Scrim Werks™ product to..
SCRIM WERKS™ 8 ft. LONG, 12”x12” SQUARE TRUSS SLIP SCREEN™
Presentation is everything to your audience, so when you want to add that extra nice décor to your set up, use Odssey’s new Scrim Werks™ Slip screens. The TS1205 Slip Screen™ truss wrap covers any 12” square, 8 ft. long truss. Slip it over a dull or scratched up truss and transform it into a clean white column or illuminate it in glowing majestic colors with an LED light wash**. Use in conjunction with other Scrim Werks™ product to c..
SCRIM WERKS™ 10 ft. LONG, 12”x12” SQUARE TRUSS SLIP SCREEN™
Presentation is everything to your audience, so when you want to add that extra nice décor to your set up, use Odssey’s new Scrim Werks™ Slip screens. The TS1205 Slip Screen™ truss wrap covers any 12” square, 10 ft. long truss. Slip it over a dull or scratched up truss and transform it into a clean white column or illuminate it in glowing majestic colors with an LED light wash**. Use in conjunction with other Scrim Werks™ product to..
2 x 4″ paper cone HF driver increase the HF performance and power handling capability.
1 x 10″ LF woofer is taken under finite element analysis to optimize magnet circuit and short-circuit ring, to have a lower distortion and maximum definition under high SPL.
Crossover is using -12dB slope to make frequency response even and smooth.
The protection circuit makes the speaker more reliable and durable.
The cabinet is made from high intensity PP, available in black or white...
The Ortofon QBert Concorde set includes the QBert Concorde cartridge and stylus, plus a cleaning brush all in a stylish, rugged case.
Designed together with DJ QBert for scratch and back cueing, this stylus has a very good ability to find the groove and stay there. It uses a spherical diamond and enables a very high output (10—11 mV).
Features:
Output voltage at 1000 Hz, 5cm/sec.: 11 mV
Channel balance at 1 kHz: 1.5 dB
Channel separation at 1 kHz: 22 dB
Channel..
Features
“Flex-Use” loading options allows CMX Series amps to drive low-impedance loads down to 2 ohms, and certain models can drive 70V and 100V distributed loudspeaker systems
“Flex-Use” input connectivity choices including actively balanced barrier strip, XLR, or ¼" TRS
“Flex-Use” output connectivity choices include NL4 Speakon™ and detachable terminal block
Rack mountable with chassis less than 16" or 40.6 mm deep
1-dB recessed, detented gain controls for fast..
ISA280: 2-channels, 185W per channel at 8 ohms, 280W per channel at 4 ohms, 430W at 2 ohms.
Designed as a cost-effective solution specifically for sound contractors, the ISA Series features seven models including four low impedance models (ISA 280, ISA 450, ISA 750, ISA 1350) rated for 2-ohm operation, and three "Ti" versions with isolated 25, 70 and 100 volt outputs for distributed audio systems (ISA 300Ti, ISA 500Ti, ISA 800Ti). Versatile loading options and a comprehensive feature set mak..