Technics SL-1210GR2 Direct Drive Turntable System

Fusing Technics’ traditional analog and digital technologies, the SL-1210GR2 is the new standard in direct drive turntable systems. With a revolutionary new drive control method for smooth, accurate rotational stability and a new power supply for an exceptionally low noise floor the new generation turntable outperforms the usual standards of its class, for rich, robust sounds and true high-fidelity listening.

Coreless direct drive motor achieving stable rotation

Low-noise, low-voltage power circuit and a switching power supply

ΔΣ-Drive suppresses vibrations from the motor for smoother, more accurate rotation

Tonearm achieving high initial-motion sensitivity

Two-layer platter with high rigidity and vibration damping

High-rigidity body and high-damping silicon insulators for smooth sound and isolation from various vibrations

Specifications:

Power Supply AC 120 V, 60 Hz

Power Consumption 11 W, Approx. 0.3 W (OFF)

Dimensions (W x H x D) 453 x 173 x 372 mm (17-27/32 × 6-13/16 × 14-21/32 inch)

Weight Approx. 11.5 kg (Approx. 25.35lbs)

Accessories Turntable, Turntable sheet, Dust cover, EP record adaptor, Balance weight, Auxiliary weight, Cartridge spacer Head shell, Overhang gauge, Screw set for cartridge, PHONO cable, PHONO earth lead, AC power supply cord, Owner's Manual

Operating humidity range 35% to 80% RH (no condensation)

Terminals  

Audio Output PHONO (Pin Jack) x 1, EARTH TERMINAL x 1

Tonearm Section  

Type Static Balance

Effective Length 230 mm (9-1/16")

Overhang 15 mm (19/32")

Tracking Error Angle Within 2° 32' (at the outer groove of 30 cm record), Within 0° 32' (at the inner groove of 30 cm record)

Offset Angle 22°

Arm-height Adjustment Range 0 - 6 mm

Stylus Pressure Adjustment Range 0 - 4 g (Direct Reading)

Head Shell Weight Approx. 7.6 g

Applicable Cartridge Weight Range (without auxiliary weight) 5.6 - 12.0 g 14.3 - 20.7 g (including head shell) (with auxiliary weight) 10.0 - 16.4 g 18.7 - 25.1 g (including head shell)

Cartridge Mounting Dimension 12.7 mm (1/2") interval

Head Shell Terminal Lug 1.2 mmφ 4-pin terminal lug

Turntable Section  

Type Direct Drive Turntable

Motor Brushless DC Motor

Turntable Speeds 33-1/3, 45 and 78 r/min

Adjust Range ±8 %, ±16 %

Starting Torque 2.2 kg-cm

Build-up Characteristics 0.7 s. from Standstill to 33-1/3 r/min

Braking System Electronic Brake

Wow And Flutter 0.025 % W.R.M.S.

Rumble 78 dB (IEC 98A weighted)

Turntable Platter Aluminum diecast, Diameter : 332 mm, Weight : Approx. 2.5 kg (5.51 lb) (Including rubber sheet)