The MiniMAC Maestro is an automated moving-head projector that provides 4 rotating slots for glass or metal gobo images, 16-bit gobo indexing, motorized focus, high-speed mechanical shutter, 540° of pan by 270° of tilt, 3-digit LED control panel, and switch-selectable power supply settings. It uses a 150 watt discharge source and may be operated with a DMX controller, as a stand-alone unit with master/ slave capability, and with a remote control device.

Specifications

• Length: 390 mm (15.4 in)
• Width: 316 mm (12.4 in)
• Height: 415 mm (16.3 in)

Source

• Lamp: 150 W discharge
• Base: GY 9.5
• Approved models: Philips CDM-SA/T 150W
• Control: remote switchable
• Photometrics (Standard)
• Light output: 1000 lumens
• Illuminance (lux or fc): 13,500 cd/distance2 (m or ft)
• Diameter: 0.32 x distance
• Beam angle: 18.3°
• Measurement conditions: 230 V, 50 Hz; no effects applied
• Measurement source: Philips CDM-SA/T 150 W lamp
• Electromechanical effects
• Gobo wheel: 4 rotating slots + open
• Gobo rotation: indexible and continuous
• Shutter: variable speed flash effects
• Focus: 1 m (3.3 ft) to infinity
• Pan: 540° in 0.013° steps
• Tilt: 270° in 0.007° steps

Control & Programming

• Control options: DMX-512, Martin remote control, stand-alone, master/slave
• Stand-alone trigger options: internal timer
• Stand-alone memory: 20 scenes
• Receiver: RS-485
• Setting and addressing: 3-digit LED control panel, remote w/ uploader
• Firmware update: serial upload (MUF)
• DMX speed control: tracking and/or vector
• DMX channels: 6 - 11
• Gobo indexing resolution: 8- and 16-bit
• Pan/tilt resolution: 8- and 16-bit
• Data I/O: locking 3-pin XLR, pin 1 shield, pin 2 cold (-), pin 3 hot (+)