Ships in 5-9 Days
Shure KSM32/SL
Features:
- Class A, transformerless preamplifier circuitry eliminates cross-over distortion for improved linearity across the full frequency range
- Embossed, high-compliance diaphragm provides extended low frequency response
- Ultra-thin, gold-layered, low mass, Mylar diaphragm for excellent transient response
- 15 dB attenuation switch for handling extremely high sound pressure levels (SPL)
- Switchable low-frequency filter provides greater flexibility to reduce background noise or to counteract proximity effect
- Integrated 3-stage pop protection grille reduces "pop" and other breath noise
- Internal shock mount reduces transmission of handling noise Some typical applications for the KSM32 are listed below. Microphone use, however, is largely a matter of personal taste. The KSM32 may be used for a variety of applications other than those listed.
Applications:
- Voice: solo, background, voice-over, broadcasting
- Acoustic instrument: such as piano, guitar, drums, percussion, strings
- Wind instruments: brass and woodwind
- Low frequency instruments: such as double bass, electric bass, kick drum
- Overhead miking: drums or percussion
- Ensembles: choral or orchestral
- Room ambience pick-up: guitar amplifier or drums Both the acoustic environment and microphone placement have significant effects on the sound obtained when miking a source. You may need to experiment with these variables to achieve the best overall sound for each application.
Technical Description:
- Cartridge Type: Permanently-biased condenser
- Frequency Response: 20 Hz to 20 kHz
- Directional Pattern: Cardioid
- Sensitivity (at 1000 Hz): Open Circuit Voltage š36 dBV/Pa (16 mV) typical (1 Pa = 94 dB SPL)
- Self Noise (equivalent SPL): 13 dB typical, A-weighted (IEC 651)
- Total Harmonic Distortion (20 Hz to 20 kHz , 2500 W load): < 0.08%* for a 120 dB equivalent SPL input
- Maximum SPL (20 Hz to 20 kHz, THD < 1%*):
- 2500 W Load 139 dB (154 dB w/ attenuation)
- 1000 W Load 133 dB (148 dB w/ attenuation)
- Output Clipping Level (20 Hz to 20 kHz, THD < 1%*):
- 2500 W Load +9 dBV (2.82 V rms)
- 1000 W Load +3 dBV (1.41 V rms)
- Dynamic Range (20 Hz to 20 kHz, 2500 W load): 126 dB (maximum SPL minus A-weighted noise level)
- Signal-to-Noise Ratio: 81 dB (IEC 651)
- Output Impedance: 150 W (actual)
- Attenuation Switch: 0 or š15 dB
- Low Frequency Response Switch: Flat, š6 dB/octave below 115 Hz, š18 dB/octave below 80 Hz
- Power: Phantom Power: 48 Vdc 4 Vdc (IEC-268-15/DIN 45 596),positive pins 2 and 3
- Current Drain: 4.65 mA typical at 48 Vdc
- Common Mode Rejection Ratio (CMRR): 50 dB, 20 Hz to 20 kHz
- Connector: Gold plated, 3-in (XLR) professional audio
- Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3
- Dimensions: 55.9 mm (2.20 in.) maximum body diameter, 187 mm (7.37 in.) long.
- Net Weight: 490 g (17.3 oz.
- Conforms to European Union directives, eligible to bear CE marking; meets European Union EMC Immunity Require-ments (EN 50 082š1, 1992).
Furnished Accessories:
- ShureLock Elastic Shock Mount (SL model only) A32SM
- ShureLock Swivel Adapter A32M
- Aluminum Carrying Case (SL model only) A32SC
- Padded, Zippered Carrying Bag (CG model only) A32ZB
- Protective Velveteen Pouch (SL model only) A32VB
Optional Accessories:
- Foam Windscreen (Charcoal Gray) A32WS (Measured 0.6 m (2 ft) from a spherical sound source, free-field conditions)
$649.00