Search
0
Shopping Cart
  • ADJ Pro64B LED RC

ADJ Pro64B LED RC

  • Availability: In Stock *
  • Product Code: pro64bledrc
  • Product Viewed: 1425
  • Retail Price: $349.99
  • Sales Price:
    $249.99

* Stock status does not always apply for local pick up at our Portland, Oregon retail store. Please call 503-222-9166 for local stock availability. Online orders can be drop shipped if this item is not in stock at our retail store.

Share:

The ADJ PRO64B RC is high output black Par Can with twenty-four 1-Watt LEDs that is ideal for lighting up stages, dance floors and entertainment venues. The fixture’s RGB color mixing allows users to get a full spectrum of color from one Par Can. The PRO64B RC features an Infrared wireless remote to control what would normally require a DMX controller or adjustments made by hand on the rear panel. Aim the wireless remote at the unit and control features such as: Black Out, built-in programs, flash, DMX addressing and RGB color change.

This fixture uses LEDs rated at 50,000 hours with a maximum power draw of 30W. DMX addressing may also be changed by the unit’s 3-button LED display. The PRO64B RC has a dual hanging bracket that makes it easy to set on the floor, has a wide 40-degree beam angle and has IEC In/Out connectors so users can “daisy-chain” the power from one unit to the next.
 
Specifications:

  • Black Ultra bright Par 64 with 24x 1-Watt LEDs (6 Red, 9 Green, & 9 Blue LEDs)
  • Great for performance stages where traditional par cans emit a lot of heat onto performers
  • Includes wireless infrared remote control up to 15 ft./4.5M (Model: ADJ LED RC)
  • 7 DMX Channel modes: 1, 2, 3, 4, 5, 6 or 7 channel modes
  • 6 Operational modes: Manual Color Mode; Color Change Mode; Color Fade Mode; Auto (Program Run) Mode; Sound Active Mode and DMX-512 Mode
  • Smooth RGB color mixing (fast or slow color change operation)
  • Flicker-free operation for film and television
  • 32 built-in Color Macros
  • Color strobe effect
  • Electronic Dimming: 0 - 100%
  • Beam angle: 30-degree
  • Linkable via 3-pin XLR cable (In/Out)
  • 3-button LED display on rear panel
  • Dual bracket system allows fixture to be hung or set on the ground
  • IEC AC outlet on rear to daisy chain power
  • Power Draw: 30W max
  • ETL & ETLC Approved
  • Run all night – No duty cycle
  • Long Life LEDs (50,000 hrs.)
  • Switchable voltage: 120V/60Hz or 240V/50Hz
  • Dimensions (LxWxH): 10” x 10” x 15”/ 249x249x380mm
  • Weight: 8 lbs. /3.7 kgs.
  • Specifications subject to change without notice

 ADJ LED RC Infrared Remote Control Features:

  • Black Out: Turns fixture On/Off
  • Auto Run: Automatically run through built-in programs
  • Program Selection: Access units built-in programs
  • Flash: Strobe effect
  • Speed: Control speed of Auto Run
  • DMX Mode Select
  • Sound Active: Activates sound active mode
  • Slave: Designates the fixture as a “slave” fixture in the Master/Slave configuration
  • Set Address: Set DMX Address on a fixture
  • RGB Buttons: Adjust RGB colors with the “+” and “-“ buttons
  • + and – Buttons: Adjust flash rate, speed of the Auto Run and Program Selection

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha