The ADJ Flat Par TRI7X is a professional “low profile” LED Par Can with extremely bright output. It features seven 3-Watt TRI LEDs (3-in-1 RGB) and will not cast any RGB shadows. The units “low profile,” sideways power & DMX Ins/Outs and dual hanging brackets make it ideal for mobile entertainers, permanent installations and for inserting into truss for uplighting. The Flat Par TRI7X has 7 different DMX channel modes, and may also run in Sound Active or Master/Slave modes. Users can also go “wireless” with the ADJ LED RC wireless remote (sold separately). This LED Par Can also features: 32 Color Macros, Electronic Dimming (0-100%), IEC AC IN and OUT on rear to daisy chain power and a 40-degree beam angle. The Flat Par TRI7’s LEDs are rated at 50,000 hours, and only draws 25-Watts of power per fixture.
Specifications:
-
Ultra bright slim Par Can with 7x 3-Watt TRI LEDs (3-in-1 RGB)
-
New Feature – Power & DMX Ins/Outs sit sideways so the unit can be set flat on the ground or set inside truss
-
Great for performance stages where traditional par cans emit a lot of heat onto performers
-
Low profile case design
-
Wireless infrared remote control up to 15 ft./4.5M (Model: ADJ LED RC - sold separately)
-
7 DMX Channel modes: 1, 2, 3, 4, 5, 6 or 7 channel modes
-
6 Operational modes: Manual Color Mode; Color Change Mode; Color Fade Mode; Auto (Program Run) Mode; Sound Active Mode and DMX-512 Mode
-
Smooth RGB color mixing (fast or slow color change operation)
-
TRI LED (3-in-1) projects no RGB shadows
-
32 built-in Color Macros
-
Color strobe effect
-
Electronic Dimming: 0 - 100%
-
Beam angle: 40-degree
-
Linkable via 3-pin XLR cable (In/Out)
-
4-button LED DMX display on rear panel
-
Dual bracket system allows fixture to be hung or set on the ground
-
IEC AC IN/OUT outlets on rear to daisy chain power
-
Safety hook on rear panel
-
Includes gel frame for optional diffusion filters
-
Run all night – No duty cycle
-
Long Life LEDs (50,000 hrs.)
-
Power Draw: 26.5W max
-
Multi-voltage operation: AC 100V-240V 50/60Hz
-
ETL listed
-
Dimensions (LxWxH): 10.75”x9”x4.25”/272x230x115mm
-
Weight: 6 lbs./2.4 kg.
-
Specifications subject to change without notice
ADJ LED RC Infrared Remote Control Features (sold separately):
-
Black Out: Turns fixture On/Off
-
Auto Run: Automatically run through built-in programs
-
Program Selection: Access units built-in programs
-
Flash: Strobe effect
-
Speed: Control speed of Auto Run
-
DMX Mode Select
-
Sound Active: Activates sound active mode
-
Slave: Designates the fixture as a “slave” fixture in the Master/Slave configuration
-
Set Address: Set DMX Address on a fixture
-
RGB Buttons: Adjust RGB colors with the “+” and “-“ buttons
-
+ and – Buttons: Adjust flash rate, speed of the Auto Run and Program Selection