Your shopping cart is empty!
Google Translate
SpecialsSEE ALL
Rane MS 1S Mic Stage Preamp
Availability: In Stock
Retail Price:
Your Price: $199.00
Features
- -127 dB Equivalent Input Noise
- Gain Control
- Signal / Overload Indicator
- Polarity Switch
- Switchable 48 V Phantom Power
- True Differential Input
- Cross-coupled Line Driver
- Internal 100-240 VAC Power Supply
The Rane MS 1S Mic Stage preamplifier provides the answer when you need just one microphone input in an otherwise line-level world. Give us a call to go from either a dynamic, condenser or electret microphone to a line-level input with a minimum of noise, distortion, cost and hassle.
The MS 1S provides 48 V switchable Phantom Power with an indicator LED, continuous rotary Gain trim between 15 dB and 60 dB, Signal/Overload LED, and XLR balanced Input & Output connectors. A Polarity switch and high-current cross-coupled output line driver round out the features.
The MS 1S utilizes one of the finest ultra low noise amplifier designs available. Featuring a true differential input with high common-mode rejection, use of the MS 1S guarantees performance usually found only in mixing consoles costing thousands of times as much. Of course, for all of that extra money you receive a proportional increase in KPSI (knobs per square inch).
The MS 1S replaces the MS 1B Mic Stage with a new internal universal power supply. The width increases by one inch -- all other features are the same.
| Parameter | Specification | Units | Conditions/Comments |
| Input Impedance | 2k | Ω | Balanced |
| Gain Range | 15 to 60 | dB | |
| Phantom Power | +48 | volts | 10 mA max |
| ..........Impedance | 6.81k | Ω | Each leg |
| Max. Input Level | +9 / -35 | dBu | Gain 15 / 60, balanced output |
| Equivalent Input Noise | -127 | dBu | 20kHz BW, Rs=150Ω, Gain=60dB |
| Signal to Noise Ratio | 94 | dB | 20kHz BW, Rs=150Ω, Gain=15dB, re 4dBu |
| Dynamic Range | 114 / 91 | dB | Gain 15 / 60 |
| CMRR | 80 | dB | Rs=150Ω, 120 Hz, Gain = 60 dB |
| Frequency Response | 3 to 200k | Hz | +0, -3db |
| THD+Noise (gain 60 dB) | .004 (Output=+20 dBu) | % | 55 to 20k Hz, 20 kHz BW, Rl=10 kΩ |
| THD+Noise (gain 15 dB) | .0006 (Output=+20 dBu) | % | 50 to 20k Hz, 20 kHz BW, Rl=10 kΩ |
| Line Driver | Active Cross-coupled | ||
| Max. Output Level | +18/+24 | dBu | Balanced, 2 kΩ load |
| Output Impedance | 94 | Ω | Each Leg |
| Signal Indicator | -11 | dBu | Balanced output, Green LED |
| Overload Indicator | +20 | dBu | Balanced output, Amber LED |
| Output Cable Length | 300 | meters | Belden 8451 or equivalent |
| Unit: Agency Listing | CSA | Pending | |
| ..........Max Power | 3 | W | C5 cord included |
| ..........Line Voltage | 100-240 | VAC | 50 / 60 Hz |
| Unit Size | 1.64" H x 6.8" W x 4.26" D | (4.2 cm x 17.3 cm x 10.8 cm) | |
| ..........Weight | 1 lb, 1 oz | (0.5 kg) | |
| Shipping Size | 3.6" H x 11.75" W x 7.2" D | (9.5 cm x 30 cm x 18 cm) | |
| ..........Weight | 4 lb | (1.8 kg) | |
Write a review
Your Name:Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below:
If you are interested in a certain product, but don't see it on our website, please call us 503-222-9166 or e-mail us!
Platinum-records.com does not accept liability for typographical or product specification errors (including pricing).
Prices are subject to change without notice.
Copyright 1997-2013 Platinum Records Inc. All Rights Reserved. Terms of Use Apply.